CONNECTION AND SET-UP
TV AND VIDEO RECORDER CONNECTION
Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection Example”). If your TV has a stereo capability, you can receive the sound in stereo via the Scart connection. Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/DVR.
For system reasons, the same video signals are to be found at the TV Scart socket as at the video cinch output.
If you are recording using an external video recorder, remember not to operate the receiver during recording, otherwise all the
AUDIO CONNECTION
If you want to play the sound on your
ELECTRICAL DIGITAL OUTPUT
The electric digital output is intended for the connection of a Dolby Digital system (see “Connection Example”).
INSERTING BATTERIES INTO THE REMOTE CONTROL
Remove the cover on the rear of the remote control.
Insert the two batteries supplied into the remote control. Ensure correct polarity of the batteries; the + and
–markings as indicated inside the battery compartment. Slide the cover back into the housing until it locks in place.
10