ON-SCREEN DISPLAYS (OSD)
Select the channel using the buttons . You can also however select the
OPTION SELECTION
Press the % (yellow) button once (twice for portal channels) to view further audio selection options, if these are transmitted by the channel provider. Use
the buttons to scroll through the available selection options. Press the % (yellow) button again, or press the button to exit this display again.
ERROR SIGNALLING
“Weak or no signal” indicates that an error has occurred in the reception system or in the receiver settings, or that the transponder is not transmitting.
Check the Sat IF connection and the LNB configuration. If you have changed settings, compare them against the basic settings (provided you had made a note of them as suggested).
CHANNEL LIST – TV/RADIO
Also pay attention to the bars at the bottom of the
Presschannelthelist. button to access the
When you open this list the channel list selection / sort order is displayed from where you selected the last channel.
At the top left you will see the selected channel list (TV Channel or Radio Channel) displayed. Press the &(blue) button to switch between the TV and radio channel lists.
32