FIRST INSTALLATION: One Cable
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
Wideband:
No further input is necessary, since all frequency ranges are set by the Wideband LNB.
Single:
If you are not using a Universal or a Wideband system, you must set the frequencies here. You can find the necessary information in the documentation supplied with your system.
Use the buttons to select the line “LNB Low Frequency”). Use the buttons or the keypad to set the exact frequency for which your LNB was configured.
When you have completed all setting for the currently selected satellite, press the button. If you have selected more than one satellite, repeat the previous ”Satellite and Position” and “LNB Type” processes for the number of satellites you selected.
When you have completed the settings for all the satellites, the following display appears:
Use the button to select the next menu item “New registration”, then press the button. The following display appears:
Use the buttons to select the desired type of installation and confirm your selection using the button. For clarity, we have split further details into two sections.
Firstly we give details of “Automatic” installation, then details of “Manual” installation.
19