Kathrein UFS 650si, UFS 650sw manual Connecting UP the VIDEO/DVR, Recording, Playback

CONNECTING UP THE VIDEO/DVR

For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder.

RECORDING

In order to make a VCR recording (Record), the satellite receiver must be switched on or the timers must be pre-programmed (see “EPG” “Recording (timer)” section).

PLAYBACK

For VCR/DVR playback you must have previously set the UFS 650 Scart socket to “VCR mode” (Scart

changeover), using the button, so that the signal path is set up from the VCR or DVR/AUX Scart socket to the TV Scart socket.

In this setting, the picture from the external recorder is switched through to the TV set during playback.

Pressing the button again restores priority to the signal from the UFS 650 “Scart>Sat“. The settings ”Scart>VCR” and ”Scart>Sat” are shown in the display of the receiver.

64