8 | Raymarine Satellite TV Systems |
Installing the ACU
The ACU should be installed below decks, in a position that is:
•dry.
•well ventilated.
•easily accessible.
•near to the Master HD receiver as some manual operation will be required if programming is on DirecTV satellites 101, 110, 119.
The ACU should be installed using the two fixing brackets supplied. These brackets can be placed on the sides of the unit to provide a top or bottom fix.
To install the ACU:
1.Select the installation site, ensuring that the proposed site meets the criteria described above.
2.Using the screws supplied fix the mounting brackets to the sides of the ACU.
3.Place the ACU in the position where it is going to be installed.
4.Connect the cables to the rear of the ACU.
5.Using a pencil, mark the 4 hole positions (2 each side) for securing the mounting brackets.
6.Using a suitable drill bit, drill the 4 holes in the required position.
7.Using the screws supplied, secure the ACU into position.