DVD Installation Instructions

Refer to the DVD Replacement Kit Installation Instructions manual (No.

750,250M) for additional aid on the following steps:

Step 1. Before installing the DVD player, connect the new DVD player to an electrical outlet and insert the DVD disc into the drawer.

Step 2. Disconnect the DVD player and bring it into the fireplace cavity.

Step 3. Proceed to connect the A/V cables as labeled. Connect the power cord.

Step 4. Place a piece of Velcro on the DVD player eye and attach the IR transmitter unit to it (see Figure 16 ).

Step 5. With the controls facing to the right hand side, tilt the DVD player sideways under the front frame, to insert it into position.

Step 6. Using the new remote control, test the fireplace for proper operation.

Step 7. Strap the DVD player (see Figure 17 ).

Step 8. Re-assemble the fireplace parts in reverse order.

Attach A/V Cables And IR Transmitter Unit

Figure 16

Strap The DVD Player

Figure 17

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.