Zanussi ZHC 95 ALU manual Installation of the hood canopy C, Drilling the wall

INSTALLATION INSTRUCTIONS

Installation of the hood canopy C

Drilling the wall

a)Using the cardboard template provided, mark on the wall the centres of holes 1 for fixing of the hood canopy C .The centre of hole 2 for fixing the chimney, (a) air outlet directed upwards or towards the wall, (b-c) air outlet to the right or left hand side, must be marked at a distance X from the line between holes 1,obtained by measuring the extension Z of the chimney required for installation, plus 18 mm X =Z +25-7.Using a Ø8 mm drill bit, drill the points marked in this way.

5a
	ø120		ø
			150
	7		2
Z			X
1			1
			25
39		100 100	ø 8
650
S36 05

5b
	105
	2
1	1

5c
105
2
1	1

b)When installed with the air outlet directed towards the wall (a), it will be necessary to drill an air ducting opening, measuring Ø120 mm, according to the diameter of the flange F provided.

Fitting the fixing elements

a)Insert the rawl plugs into holes 1 and 2 .

b)Fit the eye bolts O.

c)Fix the wall bracket S in hole 2 using the screw V (not supplied).

	2
S
	A08_07
V
	m
44	m
=
L

1

A08_06

A

14