INSTALLATION INSTRUCTIONS
Fitting the hood canopy C to the wall
a)Remove the lower grill and the active charcoal filter if present (see paragraph on maintenance).
b)Fit the support rod B using the two screws K (3,5x9,5)provided.
c)Hook the hood canopy C to the eye bolts O fixed in holes 1.
d)Adjust the support rod B so that it pushes against the wall.
e)Adjusting position.There are two adjustable hooks at the rear of the hood, which can be used to adjust its position as follows:
-Turn the screws L until the position of screws N coincides with the lower
access holes.
-Turn the screws N to adjust
the vertical and horizontal | O | |
position of the hood. | O | |
- Lock the screws L to fasten | ||
| ||
the hood against the wall. |
|
-Insert the plugs T provided in the holes giving access to screws N.
B
K
A08_08
S36_09
O
Installation of the chimney A
No matter which type of installation is being used, any wooden shelves in the area where the hood is to be fitted must first be removed, drilled and later replaced.
N |
|
| L | S36_10 |
|
|
|
| |
|
|
|
| B |
T |
|
|
|
|
| N | L |
| L |
|
|
|
| |
A08_11 | T |
|
|
|
|
|
|
| N |
15
