Zanussi ZHC 95 ALU Drilling the shelves, Direction and position of the ducting fan unit, through

INSTALLATION INSTRUCTIONS

Drilling the shelves:

a)Using the cardboard template provided, and taking hole “B ”as a point of reference, drill the shelves along the central axis to allow the passage of the chimney.

The chimney must be inserted into the shelves before it is fixed to the hood canopy C.

b)When installing the re-circulation version with the air outlet directed upwards, if the fan unit is positioned below the line of shelves it will be necessary to drill a suitable hole in the top shelf only, to allow the air ducting pipe to pass

through.

Direction and position of the ducting fan unit

a)The hood is normally supplied with the air outlet directed towards the wall, if it is to be installed

with the air outlet directed to the right or left, it will be necessary to change the direction of the ducting fan unit, proceeding as follows:

-Unscrew the screws U;

-Turn the ducting fan unit 60 ° to the right or left;

-Replace the screws U.

b)The ducting fan unit air outlets must be arranged according to the type of installation to be carried out.

·Air outlet directed upwards (re-circulation only) - Remove the plastic plug from the upper part of the venting grill and replace it on the rear part.

·Air outlet directed towards the wall.

- Remove the plastic frame from the air outlet.

S36_12

S36_13

S07 22	14
	S07

U

U

A08_14

16