INSTALLATION INSTRUCTIONS
Ducting or re-circulation fitting
Ducting fitting.
This is possible for all forms of installation:
a) Connect the air outlet to the external ducting system.
b) Remove the activated charcoal filter (if there is one)inside the hood canopy
(see Maintenance). | G | |
| ||
| ||
This is only possible with the air outlet directed upwards. Fit the venting grille G |
| |
onto the air outlet.The activated charcoal filter should be fitted inside the hood |
| |
canopy after connection to the power supply. |
| |
Connection to power supply and checking of good working |
| |
order |
|
1- It is absolutely necessary to follow the warnings 3.2,3.3 and 3.4 of paragraph 3, concerning safety measures.
2 | - | Loosen the two locking screws and remove the metal cover. |
| |
|
| Connect the hood connection to the engine connection (a).Correctly place the | S07_23 | |
|
| connectors under the cover and tighten the two locking screws (b). | ||
3 | - | Once electrical connection has been carried out, check that lights, engine and | ||
| ||||
|
| change of speed work. |
| |
4 | - | Fit the lower grill and the activated carbon filter (only for filter mode)(see Maintenance). |
a
S36_26
b | S36_27 |
18