VBrick Systems EtherneTV-NXG 1 Quick Start, Unpack the EtherneTV-NXG1 Server, Before you Begin

Page 4

V B R I C K E T H E R N E T - N X G V O D Q U I C K S T A R T G U I D E

V E R S I O N 2 . 0 . 0 E

Quick Start

1. Unpack the EtherneTV-NXG1 Server.

Each shipment comes with:

An introduction letter

Quick Start Guide and Release Notes (located on CD-ROM 8250-0002-0000)

(1) EtherneTV-NXG system

Power cord

Rack mount kit (Kit type must be specified)

Recovery CDs and a floppy disk that contains the NXG license (do not lose)

NOTE: The server comes preloaded with the Operating System and VOD application software. After the system is powered, a kick-start wizard will guide you through the initial setup for permanent operation.

Before you Begin

Make sure that there is:

A separate PC running Internet Explorer

PS/2 mouse

Keyboard

Monitor or console

NOTE: If you have purchased an external storage device such as a SCSI attached DAS it must be connected prior to powering up the NXG system.

Please obtain the following information for the EtherneTV-NXG before applying power to the unit:

NOTE: Unix commands are case sensitive and should be entered as shown.

INFORMATION REQUIRED

Answer

Example

Hostname (that will be assigned to EtherneTV

 

vbvodnxg

VOD)

 

 

EtherneTV VOD IP address

 

172.17.6.55

Default gateway (router)

 

172.17.1.5

System network netmask

 

255.255.0.0

Broadcast IP address

 

172.17.255.255

Default network IP address

 

172.17.0.0

Domain name

 

vb.loc

DNS IP address

 

64.80.0.162

EtherneTV VOD serial number (from back of unit)

 

unused at this time

Server name (Not Applicable)

 

unused?

TABLE 1

 

 

C O P Y R I G H T V B R I C K S Y S T E M S

P A G E 4

J U N E 2 3 , 2 0 0 4

Image 4
Contents June 23, 2004 Disclaimer CopyrightTrademarks Table of Contents Unpack the EtherneTV-NXG1 Server Quick StartBefore you Begin Set up the EtherneTV-NXG Server NXG-1 NXG-2Configure the EtherneTV-NXG Make required entries Verify EtherneTV-NXG Server Operation Verify entriesVbvodnxg1 Changing Time & Time Zone Introduction Overview System Components Access the server Using the EtherneTV Media ControlServerProcedure Version Accessing MCS EtherneTV-MCS VersionDownload Components Watch Live BroadcastsBrowse Video Library Scheduled ProgramsBrowse and Configure EtherneTV-NXG1 System EtherneTV-NXG AdministrationHow-to Ingest content InstructionsFTP Files and File Ingestion InstructionsFile Backup Cautions Automatic File BackupLicense Key Re-Installation Reference Operation Tips