Sony CDX-C610RDS manual Locating a disc by name, Selecting the specific tracks for playback

Displaying the disc memo

Press (DSPL) during CD playback.

CD1 DISC NAME

DISC

1 SCHUBERT

Each time you press (DSPL) during CD playback, the item changes as follows:

z Elapsed playback time		z Disc Name
	Clock Z

Erasing the disc memo

1 Press (SOURCE) to select the CD changer (for example CD2 or CD3).

2 Press (LIST) for two seconds.

3 Press (DSPL) for two seconds.

4 Press (+) or (Ð) to select the name that you want to erase.

5 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 4 and 5 if you want to erase other names.

6 Press (LIST) for two seconds.

The unit returns to the normal CD playback mode.

Locating a disc by name

—List-up (CD changer with custom file function or MD changer)

You can use this function for the discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 18).

1 Press (LIST) momentarily.

The name assigned to the disc currently playing appears in the display.

LST DISC

1 SCHUBERT

ENTER

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

•Once a disc name has been displayed for five seconds, the display goes back to its normal playback mode. To turn off the display, press (DSPL).

•The track names are not be displayed during MD playback.

•If there are no discs in the magazine, “NO DISC” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “NOT READ” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

•The information is appears only in upper cases. There are also some letters which cannot be displayed (during MD playback).

Selecting the specific tracks for playback

— Bank

(CD changer with custom file function)

EN

If you label the disc, you can set the unit to			CD/MD
skip tracks and play only the tracks you want.
1 Start playing the disc and press (SHIFT).			Changer
Bank edit mode		(PLAY MODE) for two
Then press (3)
seconds.
CD2 DISC	TRACK

51

PLAY MODE ENTER

Note

If you have not labeled the disc, the bank edit mode does not appear and the programme edit mode appears. To go back to the normal playback mode, press (SHIFT).

2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (5) (ENTER).

CD2 DISC TRACK

53 SKIP

PLAY MODE ENTER

The indication changes from “PLAY” to “SKIP.” If you want to return to “PLAY," press (5) (ENTER) again.

3 Repeat step 2 to set the “PLAY” or “SKIP” mode on all the tracks.

continue to next page n

19

Actual total number: Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)