Installation Instructions | |
|
|
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: | A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. |
CAUTION: | A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the cor- |
| responding instructions. |
WARNING: | Improper installation can result in serious personal injury! Make sure that the structural members can |
| support a redundant weight factor five times the total weight of the equipment. If the members cannot |
| support this weight, reinforce the members before installing the mount. |
WARNING: | The weight of the display placed on the mount must not exceed 175 lbs. (79.38 kg kg), the maximum load |
| capacity of the mount. |
CAUTION: | Inspect the unit for shipping damage. See “WALL MOUNT PLATE PARTS” on page 3. |
TOOLS REQUIRED FOR INSTALLATION
•Socket Set (1/2” Socket)
•Phillips screwdriver, No. 2
NOTE: Other tools may be required depending on the method of installation.
CONTENTS |
|
IMPORTANT WARNINGS AND CAUTIONS! | 2 |
TOOLS REQUIRED FOR INSTALLATION | 2 |
WALL MOUNT PLATE PARTS | 3 |
INSPECT THE UNIT BEFORE INSTALLING | 4 |
INSTALL INTERFACE BRACKETS ON DISPLAY | 4 |
INSTALL WALL PLATE | 5 |
Lag Bolt Installation Instructions (Option A) | 5 |
Concrete Installation Instructions (Option B) | 6 |
Steel Stud Instructions (Option B) | 7 |
INSTALL DISPLAY | 8 |
DISPLAY REMOVAL INSTRUCTIONS | 9 |
2