Installation Instructions |
DISPLAY REMOVAL INSTRUCTIONS
To perform service on the display, remove the display from the wall plate as follows:
WARNING: Disconnect power and audio/video cables before removing the display from its wall mount.
1.If applicable, remove the self tapping screws (70) and/or padlocks from both sides of the wall plate. This hard- ware provides security (see Figure 10).
2.Slide the security latches out on both sides to disengage the display from the wall plate. See Figure 11.
WARNING: The plasma display is heavy and extremely fragile. Exercise caution when removing the display from the mount to avoid equipment damage or personal injury.
3.With an assistant, lift the display up and off the wall plate (see Figure 11) to remove the display from the wall.
Figure 10. Remove Security Hardware
Figure 11. Remove Display
9