Omnimount OM10058, WM2-M manual ¡ADVERTENCIA! Español

Page 2

WARNING! – ENGLISH

ƒWARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.

ƒIf you do not understand the instructions or have any concerns or questions, please contact a qualified installer. North America residents can contact OmniMount customer service at 800.668.6848 or info@omnimount.com.

ƒDo not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, contact OmniMount Customer Service at 800.668.6848 or Info@omnimount.com. International customers need to contact a local distributor for assistance.

ƒFor wall mounted products: This product has been designed for use on a vertical wall constructed of wood studs or solid concrete. Wood studs being defined as a wall consisting of a minimum of 2” x 4” studs with a maximum of 24” stud spacing and a minimum of 16” stud spacing with a maximum of ½” inch of wall covering (drywall, lath, plaster). For custom installations please contact a qualified installer. For safe installation, the wall you are mounting to must support 4 times the weight of the total load. If not, the surface must be reinforced to meet this standard. The installer is responsible for verifying that the wall structure/surface and the anchors used in the installation will safely support the total load. This product is not designed to support the load of a CRT. Do not use this product for any application other than those specified by OmniMount.

ƒThis product is not designed to support the load of a CRT Television

ƒThis product may contain moving parts. Use with caution.

ƒDO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.

¡ADVERTENCIA! – ESPAÑOL

ƒ¡ADVERTENCIA! LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR LESIONES, DAÑOS MATERIALES O INCLUSO LA MUERTE. ANTES DE COMENZAR, LEA LAS SIGUIENTES ADVERTENCIAS.

ƒSi las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un instalador calificado. Los residentes de América del Norte pueden comunicarse con el servicio de Atención al cliente de OmniMount al 800.668.6848 o por escrito a info@omnimount.com.

ƒSi el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el montaje. Si necesita piezas de repuesto, comuníquese con el servicio de Atención al cliente de OmniMount al 800.668.6848 o por escrito a info@omnimount.com. Los clientes internacionales deberán comunicarse con un distribuidor local para recibir asistencia.

ƒInformación acerca de los productos que se instalan en la pared: Este producto está diseñado para ser instalado en paredes verticales con paneles de madera u hormigón. Se define a los paneles verticales como una pared que consiste de un mínimo de paneles de 5 x 10 cm con un espacio entre paneles máximo de 60 cm y un espacio mínimo entre paneles de 41 cm, con un máximo de cobertura de pared (hoja de yeso, listón, yeso) de 13 mm. Para instalaciones a medida contacte a un instalador calificado. Para realizar una instalación segura, la pared elegida debe ser capaz de soportar 4 veces el peso de la carga total. De lo contrario, deberá reforzar la superficie para que cumpla con este requisito. El instalador es el responsable de comprobar que la estructura/superficie de la pared y los tacos que se utilizan en la instalación soporten la carga total de manera segura.

ƒEste producto no está diseñado para soportar la carga de un televisor CTR. Ce produit n’est pas conçu pour supporter le poids d’un téléviseur à écran cathodique ou à écran plat.No utilice este producto para ninguna aplicación que OmniMount no haya especificado.

ƒEste producto puede contener componentes móviles. Úselo con precaución.

ƒNO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.

AVERTISSEMENT! – FRANÇAIS

ƒAVERTISSEMENT! SI CE PRODUIT N’EST PAS CORRECTEMENT INSTALLÉ OU ASSEMBLÉ, IL RISQUE DE CAUSER DES BLESSURES GRAVES, VOIRE MORTELLES, AINSI QUE DES DOMMAGES MATÉRIELS IMPORTANTS. AVANT DE COMMENCER, LISEZ LES AVERTISSEMENTS SUIVANTS.

ƒSi vous ne comprenez pas les instructions, de même que si vous avez un doute ou des questions, veuillez contacter un installateur qualifié. Les personnes qui résident en Amérique du Nord peuvent contacter le service à la clientèle OmniMount au 800.668.6848 ou à info@omnimount.com.

ƒSi vous découvrez que le produit est endommagé ou que des fixations sont manquantes ou endommagées, n’installez pas le produit. Si vous avez besoin de pièces de rechange, contactez le service à la clientèle OmniMount au 800.668.6848 ou à info@omnimount.com. Les clients habitant hors de l’Amérique du Nord peuvent obtenir de l’aide auprès de leur distributeur local.

ƒProduits s’installant au mur : Ce produit a été conçu pour une installation sur un mur vertical de béton massif ou construit sur une charpente en bois. Une charpente en bois est une structure murale constituée avec des pièces de colombage d’une épaisseur d’au moins 5 cm x 10 cm ayant un espacement de 41 cm à 60 cm et étant recouverte d’un revêtement d’une épaisseur d’au moins 13 mm (cloison sèche, lattes, plâtre). Veuillez contacter un installateur qualifié pour les installations spéciales. Pour que l'installation soit sécuritaire, le mur d'installation doit pouvoir supporter 4 fois le poids de la charge appliquée. Si tel n'est pas le cas, la surface doit être renforcée en conséquence. L'installateur doit s'assurer que la structure/surface du mur d'installation et les chevilles d'ancrage utilisées peuvent supporter sans danger le poids de tous les équipements.

ƒCe produit n’est pas conçu pour supporter le poids d’un téléviseur à écran cathodique ou à écran plat.Este producto no está diseñado para soportar la carga de un televisor CTR.

ƒCe produit ne doit pas être utilisé pour un usage autre que ceux spécifiés par OmniMount.

ƒCe produit peut contenir des pièces mobiles. Veuillez l'utiliser avec prudence.P2ƒ NE DÉPASSEZ JAMAIS LA CAPACITÉ DE CHARGE MAXIMALE DE CE PRODUIT.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents WM2-M ¡ADVERTENCIA! Español WARNUNG! Deutsch FIGYELEM! Magyar AVERTISMENT! Română ﺞﺘﻨﻤﻟﺎﺑ صﺎﺨﻟا نزﻮﻠﻟ ﻰﺼﻗﻷا ﺪﺤﻟا زوﺎﺠﺘﺗ ﻻ ΠΡΟΕΙΔΟΠΟΙΗΣΗ! ΕλληνικaWeight Capacity Maximum Screen SizeSymbol KEY 水平调整 ドリル 水平器 ハンマー オプション找到中心位置 Contents 別売り Tools Needed未提供 取り外し Set aside until later stepWood Stud Installation Find studs and mark edge and center locationsGood No Good ウォールプレートまたはウォールテンプレートを使って、取り付け場所に印を付けます木製スタッドの壁への取り付け Drill pilot holeMasonry Installation Do Not Drill Into MortarSolid Concrete 混凝土墙安装コンクリート壁への取り付け 安装墙板 ウォールプレートを取り付けます注意：如果螺钉已拧到底，请使用垫圈（未提供）进行紧固 Spacers Spacer Washer Not IncludedAttach monitor using monitor hardware, M-A, M-B, etc… モニタを取り付けた状態で掛けます。 This step may require two people締める 好みの位置または傾斜角度に調整します。 チルト位置を固定します。此页无正文 Omnimount Product Warranty EnglishP27 OmniMount Systems, Inc

WM2-M, OM10058 specifications

The Omnimount OM10058 WM2-M is a meticulously designed wall mount solution that caters to the needs of avid gamers, movie buffs, and anyone looking to optimize their home entertainment setup. This versatile mounting system is engineered to provide stability and flexibility, ensuring that your flat panel television is securely positioned while offering a clean and neat appearance.

One of the standout features of the OM10058 WM2-M is its adjustable design. The mount supports a wide range of television sizes, typically accommodating screens between 32 to 56 inches, with a weight capacity that can handle televisions weighing up to 100 pounds. The ability to adjust the viewing angle makes it ideal for various room layouts, allowing users to tilt the screen up or down easily.

The construction of the WM2-M incorporates high-quality materials, ensuring durability and reliability. Made from robust steel, this mount has been rigorously tested for strength, providing peace of mind that your investment in a flat-screen television is secure. The finish not only enhances the aesthetic of the unit but also prevents rusting and corrosion, maintaining its visual appeal over time.

Installation is simplified thanks to the comprehensive instruction manual that comes with the product, along with all necessary hardware included. The Omnimount OM10058 WM2-M features a user-friendly installation design, making it accessible for those who prefer a DIY approach. The mount is engineered to support various wall types, including studs, allowing for a straightforward and efficient setup process.

In terms of technology, this mount utilizes a sliding bracket system, which permits lateral movement of the TV once mounted. This innovation enables users to fine-tune the positioning of their television post-installation easily, accommodating for offsets and ensuring a seamless viewing experience. Additionally, the slim profile of the mount keeps the TV close to the wall, preserving valuable space in your living area.

Alongside its functional features, the OM10058 WM2-M promotes good cable management, featuring cable clips that help organize and conceal cords. This streamlined approach enhances the overall look of your home theater setup while preventing unsightly tangles.

In summary, the Omnimount OM10058 WM2-M wall mount combines robust construction, versatile adjustability, and thoughtful design. It is ideal for those desiring both aesthetic appeal and practical functionality in their home entertainment systems, making it a smart choice for modern households. Whether for gaming, movie nights, or general viewing, this wall mount sets a standard for quality and performance in the industry.
Top Page Image Contents