Omnimount Lift 42 manual ƒ Secure Lift Column and Base Bracket in enclosure, Figure a

Page 10

Step 3

ƒSecure Lift Column and Base Bracket in enclosure:

•Gently glide the lift column into place on the bayonet bracket so that the tapered slots on the column are secured to the extrusions on the bracket. Gently push down until the base bracket is touching the bottom of the enclosure. DO NOT ATTACH THE BASE BRACKET TO THE MOUNTING SUREFACE AT THIS TIME!

•For floating top installations it is recommended that the top of the lift column sits below the lip of the enclosure by 10mm (7/16”) to allow room for the top plate so that the lid sits flush and the guide pins function properly.

Figure A

2

Figure B

3

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Lift Ominmount Product Warranty Contents Monitor Kit L-U-vA ƒ Pinch Point Warning Minimum Interior Dimensions Width Depth Height ƒ Attach the Base Bracket 1 to the Lift Column ƒ Attach the Bayonet Bracket 3 to the enclosure ƒ Secure Lift Column and Base Bracket in enclosure Figure aƒ Connect Screen Adapter 12 to the Screen Support TOPDWN Before After ƒ Attach lift assembly to enclosure base ƒ Attach the Universal Adapter to the TV ƒ Connect the TV and universal adapter to the lift column ƒ Install universal adapter rail covers ƒ Using guide pins for a floating top Guide Pin/Top Plate Template Thank you for purchasing an OmniMount product
Top Page Image Contents