Omnimount Lift 42 manual ƒ Attach the Base Bracket 1 to the Lift Column

Page 8

Step 1

ƒAttach the Base Bracket (1) to the Lift Column (2):

•Using the small Hex wrench and 6mm x 20mm screws (O), connect the base bracket to the lift column. Note that one side is counter sunk to ensure flush installation of screws. Hand tighten all four screws before proceeding. If the height of the TV to be used is greater than 22” a spacer block will be needed under the base bracket and lift column.

2

1

O

x4

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Lift Ominmount Product Warranty Contents Monitor Kit L-U-vA ƒ Pinch Point Warning Minimum Interior Dimensions Width Depth Height ƒ Attach the Base Bracket 1 to the Lift Column ƒ Attach the Bayonet Bracket 3 to the enclosure ƒ Secure Lift Column and Base Bracket in enclosure Figure aƒ Connect Screen Adapter 12 to the Screen Support TOPDWN Before After ƒ Attach lift assembly to enclosure base ƒ Attach the Universal Adapter to the TV ƒ Connect the TV and universal adapter to the lift column ƒ Install universal adapter rail covers ƒ Using guide pins for a floating top Guide Pin/Top Plate Template Thank you for purchasing an OmniMount product
Top Page Image Contents