Omnimount Lift 42 manual Minimum Interior Dimensions

Before Enclosure Construction!

ƒAssemble lift mechanism and connect the TV to be used in the install to determine dimensions for the lift enclosure prior to construction. Be sure to leave room for adjustments If necessary. An out of cabinet assembly of the mechanism can be done using steps 1,4,6,8,9 and 10 in order.

(D)	(D + 2”)
(W)	(W + 2”)

(H) (H + 2”)

Minimum INTERIOR Dimensions

	(H) Minimum Height
	Height of lift in closed
	position or Height of TV + 2”
	NOTE: For use with the
	longer rails spacers will be
	needed above and below the
	lift mechanism
	(D) Minimum Depth
	Depth of TV + Depth of
(W) Minimum Width	Mount + 2”
Width of TV + 2”	Be very careful not to build
	the enclosure too shallow.
This will allow 1 “ of clearance on either
	The mount may not function
side of the television.	or damage to the TV could

occur 6