3
#1003179 Hose Kit for 1012/1016 Loader Cont’d
Connect Fittings to hydraulic Manifold
(Cont’d)
NOTE: Refer to manual MAN0104 Loader Mounting Kit #111767 for installation of loader valve kit #46675
NOTE: Loader valve hose kit #1002657 will be required to complete this installation. If hose kit is already installed, many of the fittings will need to be removed.
1. | Remove banjo screw fitting on hydraulic line above |
the return port (not shown). This will allow clearance to | |
install RETURN port fittings. | |
2. | Install fittings, quick couplers, dust cap, and colored |
A
RETURN PORT
G
22
B
K
N
bands to the hydraulic manifold RETURN port as shown | ||
in Figure 27. |
| |
3. | Install banjo screw previously removed. | |
4. | Install fittings, quick couplers, dust cap, and colored | |
bands to the hydraulic manifold POWER BEYOND | ||
(PBY) port as shown in Figure 28. | ||
| A. 66369 | Adapter, 3/8 BSTPM x 3/8 NPTF |
| B. 315030 | Adapter, 3/8 NPTM x 3/8 NPTM |
D.66367 Elbow, 3/8NPTM x 3/8 NPTM G. 66368 Tee run, 3/8
J.64300 Male quick coupler, 3/8
K.395065 Dust cap, 3/8
M.56062 Plastic band, Yellow
22.315037 Adapter, 3/8 NPTM x 3/4 JICM
24.316029 Elbow, 3/8 BSPTM x 3/8 NPTF
J | |
|
Figure 27 Return Port Fittings Installation
PBY PORT
A
D
K
M
J
Figure 28 Power Beyond Fitting Installation
5.Install elbow (24) and adapter (22) to the hydraulic manifold PRESSURE port as shown in Figure 29.
PRESSURE PORT
22
24 | |
|
Figure 29 Pressure Fitting Installation
MAN0157 (10/12/01) | Hydraulic Installation 19 |
| |
|
|