SUB-FRAME INSTALLATION Cont’d
Front Mounting Brackets
Woods 1009, 1012, 1016 Loaders
NOTE: Front mounting bracket (crossmember) is installed with loader mounting kit #111768, (Figure 3).
Backhoe can only be installed after loader mounting kit is installed.
DP3
Figure 3 Crossmember Installed with LMK #111768
Kioti 1470 Loader
1.Remove cross brace from right and left loader mounts on the underside of tractor. Retain hardware for
later use. | Right Loader Mount |
|
|
|
|
|
|
2.Position front mount (4) under tractor and secure to right and left loader mounts using hardware previously removed, (Figure 4).
NOTE: Loosen hardware on loader mounts as needed for easier installation of front mount hardware.
3. Secure rear half of mount to tractor frame using two | 15 |
|
|
|
|
| |||
|
|
|
|
| |||||
cap screw (18) and hardened flat washers (15). |
|
|
|
|
| ||||
|
|
|
|
|
|
| |||
|
|
| 18 |
|
|
|
|
| |
4. | 1004339 | Front mount (Kioti loader) |
| Loader Mount Hardware |
|
|
| ||
|
|
|
|
|
| ||||
DP4 |
|
|
|
|
| ||||
|
|
|
|
| |||||
15. | 57816 | 1/2 Hardened flat washer |
|
|
|
|
| ||
|
|
|
|
|
|
| |||
18. | 65506 | M12 x 1.25P x 35mm Cap screw |
| Figure 4 | Front Mount Installed |
|
|
| |
|
|
|
|
|
|
| |||
*Loader mount hardware
4
15 | |
|
*
18
*
*
Figure 5 Front Mount Installation
6 Installation | MAN0157 (10/12/01) |
|