Woods Equipment BH7500 manual Install Rear Hanger Bracket, Install Rear Mount

Page 9

SUB-FRAME INSTALLATION Cont’d

Install Rear Hanger Bracket

1.Install rear hanger bracket (6) to bottom of transmis- sion housing. Position bracket with the slots to the rear of the tractor. Secure using two cap screws (12) and hardened flat washers (13).

2.Torque these cap screws to 87 lbs.-ft. at this time.

2. 1004329 Rear mount

6.62977 Rear hanger bracket

12.16087 M14 x 1.5P x 35mm Cap screw

13.46070 9/16 Hardened flat washer, thick

Install Rear Mount

1.Slide round bar of rear mount (2) into slots of rear hanger bracket (Figure 6 & Figure 7).

2.Pivot rear mount upward and secure to tractor with 3-point lower link pins and hardware (Figure 8).

IMPORTANT

Figure 8 is shown with PTO shield removed for clarification. Only remove PTO shield for modifica- tions described on 5.

12

6

13

DP1

Figure 6 Rear Hanger Bracket Installed

2

6

CD5915-1

13

12

Figure 7 Rear Hanger & Rear Mount

3-Point Lower

Link Pin

2

DP2

Figure 8 Rear Mount Installed

MAN0157 (10/12/01)

Installation 7

 

 

 

Image 9
Contents MAN0157 To the Dealer Table of Contents Installation Safety RulesOperation Backhoe SUB-FRAME Installation InstallationModify PTO Shield SUB-FRAME Installation Cont’dKioti 1470 Loader Front Mounting BracketsInstall Rear Mount Install Rear Hanger BracketSub-Frame Fit-Up Typical Sub-Frame Fit-UpTorque Specifications Attach Sub-Frame to Backhoe Sub-Frame Installed to BackhoeHydraulic Installation Hydraulic InstallationAssemble Pump Kit #9261 #9261 Pump Kit For BH6500/7500 Backhoe OnlyConnect Fittings to Hydraulic Manifold #1003179 Hose Kit For BH6500/7500 Backhoe & 1009 LoaderCont’d #1003179 Hose Kit for 1009 Loader Cont’dAssemble Backhoe Valve Hoses Assemble Loader Valve HosesOperation Connect Hoses to Hydraulic Manifold Backhoe & LoaderConnect Hoses to Hydraulic Manifold 1009 Loader Only Backhoe & Loader Removed Connect Hoses to Hydraulic Manifold Backhoe OnlyConnect Fittings to Hydraulic Manifold #1003179 Hose Kit for 1012/1016 Loader Cont’d Return Port Fittings Installation#1003179 Hose Kit for 10012/10016 Loader Cont’d Connect Hoses to Hydraulic Manifold 1012/ 1016 Loader Only Loader Hose InstallationConnect Hoses to Hydraulic Manifold Backhoe & Loader Removed Mount Sub-Frame & Backhoe to Tractor Sub-Frame & Backhoe to TractorRemove Backhoe With Sub-Frame Sub-Frame & Backhoe to Tractor Cont’dStore Hydraulic Pump if Equipped Parts REF Part QTY Description #1003179 and #1002657 Hose Kits#1003179 and #1002656 Hose Kits #1003179 Hose kit for BH6500/7500 #1003179 and #1002656 Hose Kits Parts ListSAE Series Torque Chart Bolt Torque ChartBolt Size Chart Abbreviations Warranty Model No Part Warranted Duration MAN0157