Troubleshooting

Caution

CAUTION

Symptom		Items to Check		Actions to be Taken

Quality installations are best performed by qualified and

Watching the monitor for an extended period of time without the engine running

Buttons do not work.		Is the power turned on?

No sound		Is the audio which is connected with
		the audio cable set to receive
		the DVD signal output?
		Is audio cable is connected securely?
		Is the monitor which is connected
		with the audio cable turned on?
		Is the digital audio output set
		in the correct position?

Remote control does		Is the remote control facing
Remote control does		Is the remote control facing
not work properly.		the remote sensor?
		Is the distance too far?
		Is there any obstacle in the middle?
		Is the battery weak?

Check the car battery capacity.

Select the correct input mode for the audio receiver. Connect the audio cable into the jacks securely. Turn on the monitor connected with the audio cable.

Set the Digital Audio Output to the correct position, and then turn on the DVD player again by pressing the POWER button.

Point the remote control toward the remote sensor of the product.

Use the remote control within 15 feet.

Remove the obstacle.

Replace with new battery.

certified installers.

Don t touch the unit if there is a flash of lightning. You may receive an electric shock.

Do not cover or stop up heater ducts or vents. It may cause a fire or receive an electric shock.

may deplete the vehicles battery charge.

This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages.

Do not bring magnetic devices such as credit card or magnetic card near the magnets.

Moisture or condensation on lens

When a disc is brought from a cold environment to a warm one, there may be moisture on the the disc, or condensation on the pickup lens. It will affect disc playback.

1.Remove the disc from the DVD player.

2.Turn on the power and leave it on for an hour to vaporize the condensation.

Operating Notes

1.The operating temperature of this product is limited to 14 ~+140 F.

2.If your vehicle is extremely hot or cold you must allow time for your air conditioner or heater to cool or heat the vehicle until operating temperatures have returned to normal operating ranges.

3.Optimal picture quality is achieved when viewed from directly front of the monitor (+/-30degrees).

4.Do not open the housing and attempt to make any repairs yourself. Refer servicing to qualified personnel.

5.DVD Players use an invisible laser beam which can cause hazardous radiation exposure. Be sure to operate the unit correctly as instructed.

6.Do not cut the car power supply off while a disc is playing. It can cause damage to the DVD Player.

MD-1120CM specifications

Fahrenheit Technologies MD-1120CM is a cutting-edge device designed for precision measurement and real-time analysis, catering to various industries including manufacturing, healthcare, and environmental monitoring. This sophisticated tool boasts a range of features and technologies, making it a favorite among professionals seeking reliability and accuracy.

One of the standout characteristics of the MD-1120CM is its exceptional measurement capabilities. It can measure temperature, humidity, and even air quality parameters with high precision. The device can operate effectively in a range of environments, from laboratories to industrial settings, which enhances its versatility. With a temperature measurement range of -20°C to 120°C and humidity sensitivity of 0 to 100%, the MD-1120CM is adept at handling diverse conditions.

An integral component of the MD-1120CM is its advanced sensor technology. Equipped with state-of-the-art sensors, the device ensures accurate readings that are critical for proper data analysis. These sensors are designed for quick response times, allowing for real-time monitoring, which is essential in industries where conditions can change rapidly.

User-friendliness is another hallmark of the MD-1120CM. The device features an intuitive interface, complete with a high-resolution LCD display that presents data in an easy-to-read format. Users can effortlessly navigate through various settings and options, making it suitable for both experienced technicians and novices alike. The menu-driven interface simplifies the setup and operation, ensuring that users can focus on data collection rather than technical adjustments.

Connectivity is another noteworthy feature of the MD-1120CM. The device includes Bluetooth and USB connectivity options, allowing seamless integration with computers and mobile devices. This feature enables real-time data transfer and analysis, aiding users in making informed decisions without delay.

Robustness and portability are also considered in the design of the MD-1120CM. Constructed with durable materials, the device is built to withstand the rigors of demanding environments. Its compact size ensures that it can be easily transported, making it ideal for fieldwork as well as stationary use.

In conclusion, Fahrenheit Technologies MD-1120CM is a versatile and reliable device that combines advanced measurement capabilities with user-friendly features. With its cutting-edge sensor technology, intuitive interface, and strong connectivity options, it stands out as a valuable tool for professionals across multiple sectors seeking accurate and timely data analysis.