D19
D20 
| H |
Connect wiring from the motor to the wiring cover plate. | Reinstall the motor by inserting the tabs and pushing up |
| into position. Make sure the wires are not pinched between |
| the motor and the housing. |
D21 | D22 |
H |
|
Secure the motor by tightening the 2 screws. | Turn on the power source. |
Attaching the Grille |
|
E1 | E2 |
H | K |
| |
J | L |
| |
| M |
Remove the thumbscrews. | Remove dome. |
E3 | E4 |
| H |
K | K |
| |
| J |
Slide light mount over posts. | Attach thumbscrews. |
| WARNING: To reduce the risk of electrical shock, |
| all 4 thumbscrews MUST be properly installed. |
D23
ON
D24
Go to step
E1
E5 | E6 |
| K |
OFF
Test the motor. If the motor does not run, check the plug
connection.
on page 17
to attach grille.
L
L
M
Align dome and push up. | Screw dome into position. |
16 | 17 |