Operation
Initial startup procedure
When setting up for the first time, proceed as follows:
1.Switch the unit on at the power switch (3).Then press the 
button on the remote control.The standby indicator (1) goes out. The following Installation Menu appears on the screen the first time the unit is switched on, or before the first channel is stored:
Note:
Every time the TV is switched on, a starting sequence appears on the screen displayed as a white stripe.
Note:
If for some reason the set has already been switched on, the installation menu no longer appears automatically. If this is the case, to save the station, see page 14.
2.Select the required line by pressing the arrow buttons Ÿ/ ⁄ and change the relevant setting by pressing the ar- row buttons !/ ÿ.
3.Use arrow buttons Ÿ/ ⁄ to move the green marker back to the Search line.
Note:
Before the search is started, the country abbreviation
should be entered in the Country line and the
menu language in the language line.
The Standard line should be set to the country- specific TV standard ("UK" for UK).
4.Automatic channel search begins when you press the right- hand arrow button ÿ.All detected stations are automati- cally assigned to the channel positions and stored in as- cending order.
5. Press OK button to save; the display Save : OK appears in red briefly.
6.Press the EXIT button to quit the menu.
Note:
Screen settings such as e.g. brightness and contrast were preset by the manufacturer to provide optimised per- formance.You can change these settings in the Picture menu (see page 15).
For ease of operation, all operating procedures are represented on the screen in MENU form.
Item Meaning
1Main menu
2Submenu
3Status bar
It is possible to select the language in which the menu is to be displayed. Please read the Unit configuration section on page 13 for information on changing the menu navigation language.
1.The Main menu appears on the
2.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.
Menu navigation
| Menu item | see page |
| Picture | 15 |
| 16 | |
| Install. | 13 |
|
| 17 |
| Pr. set | 16 |
| Pref. | 13 |
| Timer | 19 |
| Lock $ | 20 |
| Reset | 21 |
3.Press ÿto advance to the selected submenu (Main menu item is highlighted blue).
4.To return to the Main menu from the various submenus, select < Return using the arrow keys Ÿ/ ⁄.
5.Press the arrow key ! to access the Main menu (Main menu item is highlighted green).
6. Press OK button to save; Save : OK appears in red briefly.
7.Press the EXIT button to exit the menu.
Note:
The menus disappear automatically after approx.
12 seconds providing no buttons are pressed on the re- mote control.
12