Technicolor - Thomson 30LB020S4, 23LB020S4, 20LB020S4 VHS input via Scart, VGAinput, DVI input

Page 5

Quick guide

Switching on the unit

Selecting TV mode on the remote control

Switching the TV on and to standby mode

Selecting channels

Selecting inputs

TV

Antenna (75 Ohm)

AV 1

Signal input and output

AV 2

Signal input

AV 3

Signal input (only 23LB020S4 and 30LB020S4)

S-VHS

S-VHS input (via Scart 2)

RGB

Signal with maximum picture quality (via Scart 1)

VGA

VGAinput

DVI

DVI input

Television reception via the antenna cable

1.

Connect domestic antenna or cable system

En

 

(see no. 7 Sockets on the rear of the unit page 4).

2.ConnectTV set to the power supply

(see Connecting to the mains power supply page 4).

3.SelectTV input (see Selecting sockets page 26).

4.Start automatic search

(see Initial startup procedure page 13).

5.Select channels: use the arrow buttons Ÿ/ or numerical buttons 28 (see Channel selection page 13).

Television reception via Scart socket (e.g. SAT or cable receiver)

1.Connect SAT receiver (see no. 4, 5 or 6 Sockets on the rear of the unit page 4).

2.ConnectTV set to the power supply

(see Connecting to the mains power supply page 4).

3.Select Scart input (AV 1,AV 2 orAV 3, see Selecting sockets page 26).

Usually the Scart input is assigned to the first TV channel po- sition and adjusted via the arrow buttons Ÿ/ .

4.Set up and switch on SAT receiver (see SAT receiver instruc- tion manual).

5.Select channels:

Do not use PR + /- buttons or numerical buttons, instead use the SAT receiver (see SAT receiver instruction manual).

Note:

If the television reception is input via a SAT receiver

and the channel position in theTV changes, the correct Scart input must be assigned to the new channel posi- tion (see Point 3).

1.Select the input using arrow buttons Ÿ/ .

2.Press the OK button 24 to store the setting.

5

Image 5
Contents Auxiliary equipment ContentsOverview Model 15LB020S4 20LB020S4 23LB020S4 30LB020S4 SpecificationsConnecting to the mains power supply Mains power and speaker sockets 30LB020S4 DesignationQuick guide Sockets on the rear of the unit DesignationVGAinput VHS input via ScartDVI input Television reception via the antenna cablePlace of installation Preparations Setting up, care and maintenanceCleaning Instructions for waste disposalScope of delivery Setting up and installing the 30LB020S4Preparations Connection elements on the rear of the unit ConnectionsConnection elements on the set Designation Connecting external auxiliary equipment Connecting the headphonesAntenna / cable connection Mains connectionOperation Controls Remote controlF3-F4 Red keyManual programming Operation Using the remote control for other equipmentsAutomatic code search Menu navigation Operation Initial startup procedureItem Meaning Menu item SeeChannel selection Switching on/offOperation Storing channels automatically Direct channel input / fine tuningAllocating and deleting channels Adjusting the picture settingsPicture and sound Picture menu can also be opened by pressingChannel-specific settings Adjusting tone settingsDecoder mode selection When buying video tapes, video discs and CDs, look forPanorama Sound decoder Dolby Virtual Surround Sound DecoderDolby Virtual Surround Sound and Panorama Operation Special functions TimerFade-in display window Function buttonsPIC Picture in computer Childproof lockResetting to delivery status PC modeOperation Teletext Green button Red buttonYellow button Blue buttonZoom Other teletext functionsReveal StopAuxiliary equipment Connecting auxiliary equipmentConnecting to external AV sources Selecting sockets Tuner Additional devices with switching voltageScart VidConnections Index