Operation
18.If the full channel name is set, quit the entry field using ar- row buttons !/ ÿ.
19.Select Tuner in the Source menu line for the aerial or cable system stations using the arrow buttons !/ ÿ.
20.Press the OK button to store the settings.
21.To allocate further channels select the channel line again and proceed in the same way.
22.Press the EXIT button to quit the menu.
Allocating and deleting channels
1.Press the MENU button twice, the Program list appears on the screen.
2.Use arrow buttons Ÿ/ ⁄ to select the channel whose po- sition needs to be changed.
3.Select the channel using
4.Use arrow buttons Ÿ/ ⁄ to guide the bar containing the channel name to a new position.
5.Use
6.If a channel is in the other bar, it can be deleted by pressing the OK button.
7.Press the EXIT button to quit the menu.
En
Adjusting the picture settings
Depending upon the room lighting conditions, it may occasion- ally be necessary to adjust the brightness, contrast or other picture settings.
1.Open the Picture menu: Press MENU button. The title Picture is highlighted green.
2.Press the arrow button ÿto move the green marker to the Picture menu.
3.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.
4.Use arrow buttons !/ ÿto modify the relevant data. To make modification easier, only the corresponding submenu item appears when you press arrow buttons !/ ÿ.
5.By pressing OK button, all the changes to the picture for- mat are saved.
6.Press the EXIT button to quit the menu.
Picture and sound
Note:
The Picture menu can also be opened by pressing
the red button. The green marker is already located in the Picture menu here. Press OK button to save
any changes. The menu automatically disappears
approx. 5 seconds after the last input was made.
The Brightness and Contrast settings are governed by room brightness. The Colour setting is based on skin tone. The Sharpness setting is a matter of personal preference.
The tone can also be adjusted to suit personal preferences. Select between "colder" (− left) and "warmer" (+ right).
Select the desired picture format in Format. The television screen can be adjusted to various transmission formats. Make sure the picture geometry is correct.
15