Preparations, Scope of delivery | Technicolor

Preparations

Maintenance

Electronic components are subject to a natural ageing process. In the event of malfunctions, please consult a specialist dealer. Only use the original packaging for transporting the unit.

Caution!

The unit is operated at dangerous voltages.The unit may only be opened by an authorised specialist.All maintenance and servicing work must be carried out by an authorised company. Repairs that are carried out in- correctly could result in fatal injuries to the user.

Unauthorised tampering with the inside of the TV invalidates the warranty.

Scope of delivery

•1 x LCDTV

•1 x power pack (not with 30LB020S4)

•1 x mains cable

•1 x base (with LCDTV 30LB020S4, not preassembled)

•1 x remote control

•2 x batteriesAAA1.5 volt for remote control

•1 x antenna cable

•2 x speakers (only 30LB020S4)

•2 x speaker cable (only 30LB020S4)

•1 x instruction manual

Note:

To make it easier to identify your television when handed over to customer services, state the identifica- tion number printed on the type plate on the rear of the

unit.

The manufacturer shall not warrant for any damage caused by im- proper maintenance and repair work by third parties.

Caution, risk of burning-in!

Reproducing a still image for longer periods has a negative effect on the picture quality. Burn-in images and permanent effects on the screen can be avoided by implementing a series of basic precautionary measures.

Observing the following recommendations will ensure

that the television delivers satisfactory results in the long

term:

Avoid frequent playback of the same image and mov- ing images with static areas (e.g. fixed fade-ins in the

image or video games with areas that do not move).

Do not view the same teletext page for long periods.

Avoid playing back on-screen fade-ins from a decoder, DVD player, video recorder or other equipment for long periods.

When you use the freeze-frame function on a television, video recorder, DVD player or other equipment, do not leave the picture on freeze-frame or pause for long peri- ods.

Pictures with extremely light and extremely dark areas beside one another should not be played back for long periods.

After use, always switch the display back to standby mode!

Setting up and installing the 30LB020S4

To set up the 30LB020S4 LCD TV, please proceed as follows:

Fitting the base

•Fit the base to the rear of the unit using the screws (x 4) sup- plied.

•Check that the screws are seated correctly.

Fixing and connecting the speakers

Note:

Only the speakers supplied should be connected to the television.

•Fix the speakers supplied to the housing using the screws pro- vided (2 for each speaker). Or position them in the desired lo- cation around the television.

•Connect the speakers to the terminal connectors on the rear of the unit. Press down the terminal levers to plug in the speaker cables. Use the speaker cables supplied and make sure that they are connected correctly (left +, left −, right +, right −). The black wire in the speaker cable must be secured to the black

(–) terminal on the television.The second wire must be con- nected in the same way.

Note:

Only plug in the stripped end of the speaker cable!