Operation
Resetting to delivery status
Open the Reset menu:
1.Press MENU button.
2.Select Reset in the Main menu using arrow buttons Ÿ/ ⁄.
3.Press arrow button ÿto move the green marker to the Re- set menu.
PC mode
Selecting inputs
4.If you press OK button twice, theTV settings are restored to the factory settings, i.e. all channels, the personalised picture and sound settings, the dollar sign markings, the se- curity code for the childproof lock and the timer settings are erased.The message Please wait appears during this
process. The message Reset completed then appears on the screen.
5.Quit the menu by pressing the EXIT button.
6.Disconnect the unit from the mains by unplugging it.
7.Reconnect the unit to the mains. When the unit is switched on again using the mains switch (1) or the 
button on the remote control, the initial
|
|
|
| En |
|
|
| Note: | |
|
|
| It is impossible to reset the TV to its original delivery |
|
|
|
| status if the childproof lock is activated. |
|
|
|
|
| |
|
|
|
|
|
Setting the language and adjusting screen settings
A PC can be connected to the device via VGA socket (B), or a PC or another digital signal source can be connected via DVI socket (C) (see section Connecting auxiliary equipment on page 25).
1.The VGAinput is selected via a selection menu. This ap- pears on the screen if you press the AV button.
2.Select PC or DVI by pressing the arrow buttons Ÿ/ ⁄.
3.Press the OK button to store the setting.
1.Open the Picture menu: Press MENU button.
2.Use arrow buttons Ÿ/ ⁄to select the individual menu items.
3.Use arrow buttons !/ ÿto modify the relevant data. Pressing OK button saves all the changes to the picture format.
Press the EXIT button to quit the menu.
A window with the settings for the screen resolution (PC), hori- zontal deflection frequency (HFREQ) and vertical deflection fre- quency (VFREQ) appears for a few seconds.
Note:
The television is compatible with Microsoft andApple operating systems.
21