Programme Selecting (direct access)
Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes be- tween 10 - 99, you must use the double digit button
this OSD is displayed at the left hand upper on the screen.
After then, press the digit buttons consecutively which programme you want to select (eg. for programme 27, first press 2 and then 7). When it is late to press any digit button this function will be ignored and the dis- play will be erased. In the same way it must not be late to press any digit button after entering the first digit. The limit of the delay time is 3 seconds.
Press directly the programme number to reselect sin- gle digit programmes.
Programme Swapping
•Press "P<P" (programme swap) button to select the last selected programme. This button provides swap- ping between last two selected programmes. For ex- ample, select programme 8, then select programme 2. Now, if you press "P<P" button, programme 8 will be selected. If you press the same button again, pro- gramme 2 will be selected and so on.
Menu System
Your TV has been designed with a menu system, to provide an easy manipulation of a
Press the “M” button. The MENU will be displayed in the middle on the screen.
All the selected items in this menu system is indicat- ed with HIGHLIGHTED characters and with an arrow on the leftside of items6281')(,163,&(52*5$785($//$.0
To select a 
” or “ ” button, and press “
” or “
” button. Each option can also be selected
with the coloured button and "
" button on the re- mote control.
ENGLISH
MENU
The menu system is described below.
The short way in order to enter the menus, press :
“M” Button, | Menu. |
Red Button, | Sound Menu. |
Green Button, | Picture Menu. |
Yellow Button, | Feature Menu. |
Blue Button, | Install Menu. |
“Info” Button, | Program Menu. |
Menu button has two functions; first is opening or closing the “M”, and the second is closing the sub- menu and then opening its parent menu.
Sound Menu
To change sound settings
•Enter the Sound Menu directly, pressing the Red button or,
•As you enter the MENU, sound will be the first se- lected option. In the MENU, select SOUND using “
” or “
” button, then enter the sound menu press- ing “
” or “
” button.
Setting Volume
As you enter the sound menu, Volume will be the first selected option.
•Press “
” button to increase volume.
•Press “
” button to decrease volume.
Or you can directly change the volume settings using “
+” (to increase) or 
”
Setting Balance
It allows adjusting the distribution between the left and right speakers.
•Using “
” or “
” button select Balance.
•Press “
” button to change balance rightward.
•Press “
” button to change balance leftward.
When balance control is in mid position, the cursor is displayed with the two reciprocal arrows.
- 10 -
09.09.2003, 10:54 |