Selecting Sound Mode, Equalizer | Technicolor

Selecting Sound Mode

•Using “” or “” button select Mode.

•Press “” or “” button to change Mode.

You can select MONO, STEREO, DUAL-I or DUAL-II mode, only if the selected channel supports that mode.

You can also change sound mode directly pressing “I- II” button on your remote control.

Setting Effect

You can use this feature to switch ON and OFF sound effect. Pressing “” or “” button will turn on or off this feature. If the current sound system is Mono and the sound effect is set ON, then the sound will be heard as if it is Stereo. If the current sound system is Stereo, switching this effect on will make the sound deeper. Switching it off will make no change in Mono and Stereo.

In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option.

To Change Headphone Sound Settings

Pressing “” or “” button on Headphone, enter the Headphone menu. This is a sub-menu of Sound menu, and all options in this menu are working as the same in the Sound menu.

Setting Headphone Volume

•As you enter the Headphone sound menu, Volume will be the first selected option.

•Press “” button to increase volume.

•Press “” button69/80(725(81'to02'(decrease0212volume.

Setting Headphone Sound Mode

• Using “” or “” button select Mode.

ENGLISH

Pressing “” or “” button will change the current sound mode. (e.g.: If the current sound mode is ste- reo, it will be stereo or visa versa).

In case of bilingual broadcast, you can select original or dubbed language again using mode menu. So when somebody listens to the original language from the loudspeakers, somebody else can listen to the dubbed language from headphone.

To Store the Headphone Settings

• Using “” or “” button select Store. Press “” or “” button to store current headphone volume and balance. The stored values will be valid for all the pro- grammes.

Equalizer

To enter Equalizer sub-menu, select Equalizer using “” or “” button, then enter Equalizer menu press-

ing “” or “” button+].

.02'(6725(3(5621$/

In Mode item there are four predefined and one user defined options. These are PERSONAL, MUSIC, SPEECH, JAZZ and FLAT. The predefined options can not be changed by the user. The Personal option may be adjusted by the user.

The 5 items below the Mode are available to adjust the sound settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz and 10 kHz. To change the values of 5 frequency options, select one of the options by

“” or “” button, and then press “” to increase the value, or “” to decrease the value.

To store the Equalizer settings, press “” or “” but- ton on “Store” option.

Setting Avl

Automatic Volume Limiting (AVL) function normalizes sound to obtain fixed output level between programs, having different sound levels. Pressing “” or “” but- ton will turn ON and OFF this feature.

- 11 -

EU2845ST&2845W-MAV-1541-ENG-STEREO-11AK45.p65

09.09.2003, 10:54