6) Playback NTSC
Connect NTSC VCR player to Euroconnector at the back of the TV.
Connect NTSC VCR player to RCA Jack at the front of the TV.
Then, press “$9“ button to select
7) Copy Facility
Source selection for VCR recording.
•Select Features Menu in the MENU.
•Select
8)Search for and store the test signal of the video recorder
•Unplug the aerial cable from the aerial socket “ANT” of your video recorder.
•Switch on your TV and put the video recorder on the test signal. (See the handbook for your video re- corder.)
•Enter the Tuning menu via the Install menu.
•Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. See Tuning, Search and Store TV channels. Store the test signal under programme number 0.
•Replace the aerial cable in the aerial socket “ANT” of your video recorder once you have stored the test signal.
9) Camera and Camcorder
To connect to Front-AV input (F-AV):
Connect your camera or camcorder at the front side of your TV.
•Connect your equipment to the TV via VIDEO (yel- low), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.
10)Connect the decoder to the video recorder
Some video recorders have a special euroconnector for decoder.
•Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the handbook of your video recorder.
•To connect your video recorder to the TV, see TV and Video Recorder section.
If you want to connect more equipment to your TV, consult your dealer.
11) Connecting Headphones
Use the stereo headphone socket on the lower right side of your TV, to connect headphones.
ENGLISH - 20 -
09.09.2003, 10:54 |