•If the selected subcode page is not displayed in a
short time, press “
” button. TV programme will be displayed on the screen.
•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.
•Press “
” button to display the selected Teletext page.
10 To exit Teletext
•Press “
” button. The screen will switch to TV mode.
11) To Display the Time
•While watching a TV programme with Teletext trans-
mission press “
” button. The current time informa- tion, captured from Teletext will be displayed at the upper right of the screen.
•If the programme being watched does not have Tele- text transmission, no iformation will be displayed.
12) Fastext
Your CTV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.
•Press “
” button to move the Teletext screen for- ward one page at a time.
•Press “
” button to move the Teletext screen back- ward one page at a time.
For Fastext
The
•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV.
1) Via the Euroconnector
Your TV set has two Euroconnector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors to your TV, use optional EXT.1 or EXT.2 inputs.
If an external device is connected via EXT.1 Eurocon- nector socket TV is switched to AV mode automatical- ly. If the signal is RGB then the RGB OSD indicator is displayed on the screen.
2) YCbCr Mode
This mode is only used for the equipment which have YCbCr signal at their output. You can watch only YCb- Cr signal at this mode. RGB, Y/C or CVBS signals can not be watched.
3) Via Ant Input
If you want to connect to your TV, peripherals like vid- eo recorders or decoders, but the device you want to connect does not have Euroconnector, you should connect it to the ANT input of your TV set.
If the VCR is connected via antenna input it is sug- gested to use the Programme 0.
4) Decoder
Cable TV offers you a wide choice of programs. Most of them are free, others are to be paid for by the view- er. This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet supplied with your decoder.
a)Connect a decoder with an aerial socket to the TV
• Connect the aerial cable.
b)Connect a decoder without an aerial socket to the TV
•Connect the decoder to your TV with a eurocable to EXT.1. When your decoder has a Euroconnector you can obtain better picture quality if you connect a eurocable to EXTERNAL.
5) TV and Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also con- nect a eurocable to EXTERNAL sockets.
ENGLISH - 19 -
09.09.2003, 10:54 |