Technicolor - Thomson ETC210 specifications Precautions, Safety, Care, Demagnetization

Page 1

ETC210_en 2/05/03 17:51 Page 1

Precautions

Safety

The television’s components are sensitive to heat.The maximum ambient temperature should not exceed 35° Celsius. Do not cover the vents at the back or sides of the television.

Leave sufficient space around it to allow adequate ventilation.

Damp in rooms where the set is installed should not exceed 85% humidity.

If you have to use the television outdoors, do not expose it to water from rain or splashing.

Therefore be careful not to place any object containing a liquid (vase, glass, bottle,...) on or near your appliance.

Moving it from a cold atmosphere into a warm one can cause condensation on the screen (and on some components inside the television). Leave the condensation to evaporate before turning the television on again.

If you are away for a long period, switch the set off at the on/off switch.

Even when off, some components remain in contact with the mains electricity supply.

To completely isolate it you must remove the plug from the mains supply socket.

According to the model dependent, the on/off switch is located at the front or side of the television.

During thunder storms, we recommend that you disconnect the television from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it.

For this reason, keep the mains socket and aerial socket accessible so they can be disconnected.

Immediately disconnect the television if you notice it giving off a burning smell or smoke.

You must not under any circumstances open the television yourself.

You are at risk of electrocution if you do so.

The set is provided with adequate shielding to avoid the emission of X-rays.

Work by unqualified persons, modifications to the high voltage or replacement of the tube by a model not complying with the manufacturer’s recommendations may cause a sharp increase in X-ray emissions.

A set modified in this way no longer meets the original specifications and should not be used.

Care

Clean the screen with a glass care cleaner and the rest of the set with a soft cloth and neutral detergent.

Regularly dust the vents at the back or sides. Using solvents, abrasive or alcohol based products risks damaging the television.

Demagnetization

Badly shielded loudspeakers or other strong magnetic fields near the TV can cause patches of colour to appear on the screen. Move any magnetised materials away from the TV, switch the set off and switch it on fifteen minutes later.

EN

THOMSON is not liable if the television is used other than in accordance with this manual.

In our efforts to improve the quality of our products, we reserve the right to change their features.The information contained in these instructions are therefore liable to change and are not contractual.

The pages of this publication are printed on recycled paper

1

Image 1
Contents Safety PrecautionsCare DemagnetizationSpecific precautions for projection TVs Contents To switch your set off stand-by Using remote control for TVMore info Colour keys can also be used to operate teletextManual programming Using remote control for other equipment RC 311TAM1UK Socket Switching onIt borders Initial set-upDeleting a channel Changing the nameThese settings only apply to projection televisions Adjusting the convergenceCentre Convergence menu appears Manual channel set-up Installation Main Menu is displayedIf this is the case, select Aerial instead of Cable Everyday use Accessing AV programmesTime Setting the time List of programmesList of programmes Return returns to the Overview menuReturn returns to Installation Main Menu AV1 video input usingPicture and Preferences PreferencesSound type select the relevant sound type Virtual Dolby SurroundFollowing heading is then displayed in blue at the bottom TeletextFollowing article is then displayed in blue at the bottom Additional functionsThen use Program infoWith OK ButtonOther connections