ETC210_en 2/05/03 17:51 Page 8
Adjusting the convergence
Your projection television is equipped with three coloured projection tubes, one each for red, green and blue.The images (red, green and blue) are projected onto the screen where they converge to form a single colour image. It occasionally happens that after a certain period of operation or as a result of vibration (if you have moved the television, for instance), the convergence goes out of alignment.This results in coloured contour appearing around people and objects, requiring the convergence to be adjusted.This page explains this procedure.
EN
CENTRE CONVERGENCE
Red convergence adjustment
+ + +
These settings only apply to projection televisions.
CENTRE CONVERGENCE
In order to achieve an efficient setting, leave your projection television on the same channel for about ten minutes before starting this procedure.
The CENTRE CONVERGENCE menu appears automatically at the end of the automatic channel
Press Red button to ajust red convergence.
Usings Up, Down, Left, Right buttons, superpose red crosses with green crosses.
CENTRE CONVERGENCE
Blue convergence adjustment
+ + +
Press Blue button to ajust blue convergence.
Usings Up, Down, Left, Right buttons, superpose blue crosses with green crosses.
Once the settings have been configured, press EXIT button to close this screen.
More info
During initial
If you wish to access this menu later on, display the OVERVIEW menu by pressing the menu button, select the option Installation and press OK to confirm.
When the Installation main menu appears, select Centre convergence and press OK.
The Centre Convergence menu appears.
If you press OK button to leave the menu, you return :
-to INSTALLATION MAIN MENU if you accessed the
CENTRE CONVERGENCE menu from INSTALLATION MAIN MENU.
-to PROGRAMMME ORGANISATION menu if you accessed the CENTRE CONVERGENCE menu at the end of automatic channel
8