Setting the time List of programmes | Technicolor

ETC210_en 2/05/03 17:51 Page 11

Setting the time – List of programmes

The information on this page explains how to use the TIME menu functions (Setting the time, Sleep timer,Wake-up), as well as tho- se for the LIST OF PROGRAMMES menu.

OVERVIEW

Exit

Program Info

Sound

Picture

>Time Preferences Installation

TIME
Return
Sleep timer	< I > 00:00
Current time	11:28
Wake-up timer	þ
Wake-up time	07:07
Programme number	08 EURO
Daily	þ

Time

Display the OVERVIEW menu using the MENU button and select the Time option. Press OK to confirm.The TIME menu is displayed.

Return: returns to the OVERVIEW menu.	EN

•Sleep timer: set an automatic shut-off time (0 to 4 hours, with 5 minute steps) using

the buttons.

Set --:--to cancel this function.

When the sleep timer is on, a message appears one minute before the TV set goes into standby mode.

Press any button on the keyboard or on the remote control to cancel standby mode.

Current time: enables the time to be adjusted if it is not correct.

Enter four digits using the remote control numeric buttons.

Once you have set the time, you can use the Wake-up timer feature.

Time entered manually will be lost in the case of a power cut. You must then re-enter it.

Wake-up timer: press OK to check the box in order to enable this function and display the menu options.

Wake-up time: enter the wake-up time using the numeric buttons.

Programme number: use the buttons or numeric buttons (2digits) to enter the number of the programme you want to wake you up.

Daily: press OK to check the box if you want a daily wake-up.

Press EXIT to close the menu.

A message informs you that the wake up timer has been programmed.

Put the TV set into standby mode using the B button on the remote control.The indicator on the front panel starts flashing slowly.The TV set will automatically switch on at the programmed time and for 1 hour duration if you do not interrupt it by using the remote control.

Excepted volume buttons, keyboard is locked until you change channel.

LIST

Exit

01TF1

>02 FR2 TV

03FR3

04C+

05FR5

06M6

Page - / +	< / >
Programme	0 - 9

List of programmes

Press the LIST (green) button on the remote control to display the LIST of programmes. It has a maximum of 11 pages and shows the name and the number of each programme.The last page lists units connected to the AV sockets.

It opens on the page where the programme you are currently watching is listed.

To watch one of the programmes on the displayed page, use the PR + / PR - or or buttons and press OK.

You can also enter the last digit of the programme number (for example, 5 for 25).

You can scroll through the pages using the buttons.

Leave the list with EXIT.