Initial set-up, It borders | Technicolor - Thomson ETC210 specification

ETC210_en 2/05/03 17:51 Page 7

Initial set-up

The initial set-up consists of carrying out all the necessary settings to search and store all the channels you can receive in your area. Make sure that the TV is switched on and follow steps 1 to 6 on this page.

When you first switch the TV on, the language selection menu appears.

If this does not happen, refer to Manual channel set-up section to find out how to carry out an Autosearch.

>English Français Deutsch Italiano Español Português Nederlands Svenska Dansk Norsk

……

	B
B	O
B	O	B
	B
	B
B	O	B
	B

1	Choose the language from the menus with the or	button.
2	Confirm with OK. A list of countries appears.
3	Choose the country with the or button.

This is the country you are in, or the country whose channels you want to receive if you live near	EN

it borders.

4	Confirm with OK. A welcoming message appears.
5	Start auto installation by pressing OK.
	The menu that appears tells you how set-up is progressing. Wait for the end of set-up mes

COUNTRY SELECTION

Return

>U n i t e d K i n g d o m E i r e

F r a n c e G e r m a n y I t a l y

S p a i n

P o r t u g a l H o l l a n d

B e l g i u m a n d L u xe m b o u r g S w i t z e r l a n d

A u s t r i a

… …

Other

PROGRAMME ORGANISATION

Return		01	TF1
Return		02	FR2
		03	FR3
Select program. <I>	02	04	C+
Swap with PR :	- -	05	FR5
Change pr. name	FR2	06	M6
Change pr. name	FR2	07
Delete program.	02	07
Delete program.	02	08
		09

sage before leaving the menu, otherwise the channels will not all be memorised.

Depending on the number of programmes available, auto installation can take up to 10 minutes.

Channels are arranged in a pre-set order. To modify this order, name and rename channels

or delete channels stored twice, press OK and go to step 6.

If you do not want to reorganise the channels, press EXIT to close the menu.

6 The PROGRAMME ORGANISATION menu allows you to name channels, change

the sequence of channels and delete channels stored twice or with poor reception

quality.

Follow the instructions on the screen. Use a TV programme magazine to identify the various channels.

•Organising your channels: Select the Select program. line.

Look for the channel that you want to assign the number 1 to with the PR + and PR -

or buttons using the channel logos to help you.The number already assigned appears on the Select program. line. Select the Swap with PR line, key in 01

and press OK.The channel goes to first position: the two channels are swapped.. Repeat this procedure for the other channels.

•Deleting a channel:

Select the Select program. line and scroll through the channels using the PR + and PR -

or buttons .

When you come to a channel to be deleted, select Delete program, and press OK. Confirm by pressing again OK button.

•Changing the name:

Select the Change pr. name line and choose the character to be altered with the buttons. Scroll through the alphabet using the 1 and 2 buttons.

The name will be changed when you change line or leave the menu with EXIT button.

You may subsequently return to this menu by selecting the Programme organisation line in the INSTALLATION MAIN MENU.

ODuring the initial set-up for projection televisions, a menu for setting the convergence appears at the end of the automatic set-up process.

Refer to the next page for information on configuring these settings.

More info

Missing channels:

Channels are searched for according to the country selected, refer to the “Manual set-up”chapter to set up channels that have not been found.

For cable networks, if some channels have not been found, select Other instead of the country and re-start an Auto update.

Decoder:

If you have connected a decoder to the AV 1 socket, after the initial set-up you should display the MANUAL PROGRAMMING menu and confirm the Decoder option for concerned channels.

Refer to page 9.