Colours/Label Film Data
4.6. Colours
Sony DADC uses the Pantone Matching System (PMS).
Please mark each label film with the Pantone colour number requested by you. Please select your colour from the Pantone Colour Selector 1000, except for double impression (2x) colours.
When using Pantone colours 801 to 814, preprint- ing should be carried out with white colour in order to achieve the luminescent effect similar to the Pantone Colour Selector 1000.
When producing your films please mind that a base of polycarbonate with reflecting aluminium coating is printed and therefore there may be colour deviat- ions compared to printing on paper.
To provide (as much as possible) a compliance of the colours of printwork (e.g. booklets) with the DVD label printing, we advise to preprint a full white base on the DVD.
4.7.Label Film Data on Electronic Storage Media
Sony DADC employs a Graphics Studio with the following standard DTP (Desktop Publishing) equipment:
HARDWARE
●Apple MAC G3
●Laser imager AGFA AccuSet 1000 with Software Taipan RIP(resolutions up to 2400 dpi)
●Laser imager AGFA Avantra 25 with Software Taipan RIP (resolutions up to 3600 dpi)
●3M Desktop Colour Proofing System
●Drum scanner ”Chromagraph S3300” (resolution up to 14000 dpi)
SOFTWARE |
|
recommended software | accepted software |
● Quark | ● Aldus Pagemaker |
● Aldus Freehand | ● Corel Draw (DOS) |
● Adobe Illustrator |
|
● Adobe Photoshop |
|
Apple Macintosh Data
If your label films are produced on an Apple Macintosh system you may transmit your designs to
us on electronic storage media for film
DOS Data (Corel Draw)
If you have edited your designs under DOS, please send us a placeable EPS file in which the text is converted into curves and the image identification set is switched on.
If you have used Corel Draw please send us the CDR file.
Other hardware and software
If you operate another software or hardware format please contact our Graphics Studio (tel. +43/62
The following storage media can be accepted:
●ZIP disk, JAZ disk and
●3.5” floppy disk in Mac or DOS format
●44/88/200 MB cartridge /5.25”) in Mac format
●270 MB cartridge (3.5”) in Mac format
●MO disk 230 MB (3.5”) in Mac format
Please do not forget:
●Laser printout: Attach a
●Fonts: Indicate manufacturer and all display settings, if necessary enclose screen and printer fonts.
●TIFF and EPS files: All graphic files (logos, company logos etc.) have to be supplied in all cases.
●Changes: Beware of the major resolution of the laser imager with fine lines, outlines and half tones. In general these become thinner.
●Marking: Your floppy or cartridge should be marked to provide clear identification.
●Liability: We do not assume liability for incomplete or defective files. Only submit copies you have checked and stored carefully.
All labelfilm templates can be downloaded as QuarkXpress file from our website: http://www.sonydadc.com. Upon request we will provide a 3.5” disk with all DVD logos and the copies of all label film specifications and printwork specifications used by us as Tiff or EPS and/or QuarkXPress files, respectively. Please contact our Customer Service department in this respect.
17