Recording a Program
Express Recording
Express recording lets you record up to four hours or to the end of the tape without programming the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end of the recording.
How to Use Express Recording
1. Insert a tape with safety tab in place.
The TV/VCR will turn on.
2. Select the channel to be recorded.
To record from the AUDIO/VIDEO IN jacks, press 00. Two selections appear in the channel field. Press 1 to select VIDEO 1, the rear AUDIO/VIDEO IN jacks. Press 2 to select the front panel AUDIO/VIDEO IN jacks.
3. Press SPEED to select a recording speed.
You can also change the speed of the recording in progress.
4 | . | Press | REC | twice to activate express recording. |
| |||||
5 | . | Press | REC | repeatedly until the desired amount of | Time | |||||
|
| recording time is displayed. | 0:30 | (30 Min) | ||||||
|
| Each time you press | REC, | the recording time increases | ||||||
|
| as shown below: |
|
|
| 1:00 | (1 Hr) | |||
|
|
|
|
|
|
|
|
| Press | Recording |
|
|
|
|
|
|
|
|
| REC |
|
|
|
| RECORD LENGTH 0:00 |
|
|
|
| |||
|
|
|
| Ch 04 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| 1:30 | (1 Hr, 30 Min) |
|
|
|
|
|
|
|
|
| 2:00 | (2 Hrs) |
|
|
| Press REC to set length |
| 3:00 | (3 Hrs) | ||||
|
|
|
|
|
|
|
|
| 4:00 | (4 Hrs) |
|
|
|
|
| Display |
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| 0:00:00 | (Normal Record) |
|
|
|
|
|
|
|
|
| 0:00 | (Turns Off) |
|
|
|
|
|
|
|
|
|
|
|
The TIMER indicator on the TV/VCR’s front panel will light during express recording.
During express recording, press REC to display the time remaining on the screen. Press REC again to increase the recording time.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on the remote to stop the express recording.
— OR —
Repeatedly press REC until RECORD LENGTH: 0:00 appears. The recording stops after a few seconds.
22