Buttons
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
PAUSE
Pauses the tape during playback.
Pauses the tape during recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the TV/VCR on or off.
PREV CH (Previous channel)
Switches between the last two channels selected.
Select one channel and then select the other using the number buttons. Press PREV CH to switch between the two channels.
REC (Record)
Starts TV/VCR recording.
Used for express recording.
Using the Remote Control
RESET
Resets video functions to factory settings.
Used to reset time for
REW (Rewind)
Rewinds the tape when the TV/VCR is stopped.
Searches the picture in reverse during playback.
SPEED (Tape Speed)
Selects a recording speed (SLP, SP, or LP).
STOP
Stops functions such as record, play, rewind, fast forward, and pause.
TRACK and
(Tracking up and down)
Lets you manually adjust tracking to reduce the streaks that may appear in the picture during playback.
VOL < and > (Volume up and down)
Raises and lowers sound.
Remote Cleaning
This remote is designed for use in the kitchen or other areas where the remote may get dirty. To clean this remote, use a soft cloth dampened with mild soap diluted with water. DO NOT
SUBMERGE THIS REMOTE.
7