Location of Controls
Front Panel
Tape Compartment
Remote Sensor
Headphone Jack
AUDIO IN and VIDEO IN Jacks
Receives audio and video signals from another component, like a VCR or camcorder when it is connected to these jacks.
To select these front panel jacks, press 00 twice to display VIDEO2.
CH ^ and v (Channel up and down) Selects next higher or lower channel in the TV/VCR’s channel memory.
Used for manual tracking when a tape is playing.
F. FWD (Fast Forward)
Fast forwards the tape when the VCR is stopped. Searches the picture forward during playback.
Headphone Jack
Connect headphones (not supplied) to this jack.
PLAY/PAUSE
Press once to begin playback of a tape. During playback, press to pause. Press again to resume playback.
POWER
Turns the TV/VCR on or off. The indicator in the button is lit when the power is on.
REC (Record)
Press to start TV/VCR recording. The indicator in the button lights during recording.
Remote Sensor
Receives signals from the remote. Aim remote at this sensor with no objects between them.
REW (Rewind)
Rewinds the tape when the TV/VCR is stopped. Searches the picture in reverse during playback.
STOP/EJECT
Stops normal functions such as record, play, rewind,
Press when a tape is stopped to eject the cassette.
TIMER Indicator
Lights when a timer program has been set and a cassette with safety tab in place is in the TV/VCR.
Flashes when a timer recording has been set and the TV/VCR is turned off with no cassette inserted, a cassette with no safety tab has been inserted, or there has been a power interruption.
Lights when the
VOL + and – (Volume up and down)
Raises and lowers the sound.
Note:
To disable Front Panel Buttons, see Front Panel Block on page 10.
26