Setting Up the TV/VCR
Startup
12. Set the Time and Date (Clock)
To set the clock:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display the SET TIME and DATE screen.
D. Use the number buttons on the remote to enter the time.
•Press 0 before 1; 0 is added automatically before all other numbers. Press 1 for AM or 2 for PM. Example: For a time of 1:07 PM, press 0, then 1, then 0, then 7, then 2.
E. Use the number buttons on the remote to enter the date.
•The day of the week will automatically appear after you enter the year.
•Press CLEAR on the remote at any time to change incorrect entries.
F.Press MENU on the remote to start the clock.
G. To exit and return to TV viewing, follow the
H. To display the time and date, press DISPLAY on the remote.
13. Select a channel and adjust the volume
A. Press CHANNEL up or down or press the number buttons on the remote to select a channel.
Example: For channel 2, press 0 then 2. The channel number is displayed on the screen.
For cable channels over 99, press and hold 1 until 1– – appears. Then enter the next two numbers. Example: For channel 102, press and hold 1. When 1 - - appears, press 0, then press 2.
B. Press VOL left or right to adjust the volume. The volume display appears on the screen.
TV/VCR MAIN MENU
1Screen
2 Time
TIME
1 Set Time and Date
SET TIME AND DATE
Time
(hh:mm)
Date
Press MENU to cancel
SET TIME AND DATE
Time 01:07 PM
Date 10/31/98 Saturday
Press CLEAR to correct Press MENU to set
Ch 02
5