Hooking Up the TV/VCR
Connect a VCR or Camcorder for Copying Tapes
A. VCR for Copying Tapes | A |
1. Connect as shown.
This connection requires additional accessories not provided.
2. Plug in power cords of VCR and TV/VCR.
3. Turn to page 27 for “Copying and Editing Tapes.”
Press 00 on the remote to select the line (audio/video) inputs on the TV/VCR to receive the signal from the VCR.
If your VCR has stereo AUDIO OUT jacks, connect the audio cable to the jack labeled MONO. If neither jack is labeled MONO, you may need a Y- adapter to hear both channels.
Caution: The unauthorized recording of television programs and other materials may infringe upon the rights of others.
B. Camcorder for | B |
Copying Tapes |
|
1. Connect as shown.
This connection requires additional accessories not provided.
2. Plug in TV/VCR’s power cord.
3. Turn to page 27 for “Copying and Editing Tapes.”
Press 00 on the remote to select the line (audio/video) inputs on the TV/VCR to receive the signal from the camcorder.
If your camcorder has stereo AUDIO OUT jacks, you may need a Y- adapter to hear both channels.
Caution: The unauthorized recording of television programs and other materials may infringe upon the rights of others.
30