MODEL G1014Z/G1014ZX |
COMBINATION SANDER |
MANUAL UPDATE |
This update covers changes made to the machine after the owner's manual was printed. All page num- ber references refer to the owner's manual for this machine. Keep this update with your owner's man- ual for future reference. If you have questions, contact Tech Support at (570)
What Changed?
We have added a sleeve guard to the sander to help reduce the risk of entanglement. The sleeve guard MUST be installed on the idler roller guard using the lock knobs and flat washers, as shown in Figure 1.
Install the idler roller guard and sleeve guard onto the idler roller after belt tension and tracking are properly set, as described on G1014Z Manual Pages 12 & 13.
#10 Flat
Washer
Idler Roller
Guard
Sleeve Guard | Lock Knob |
|
Figure 1. Installing sleeve guard.
Machine Inventory (See Page 6)
The following items have been added. Refer to the full manual for a description of the main inven- tory.
Box Contents: | Qty | |
A. | Sleeve Guard | 1 |
B. | Lock Knobs | 2 |
C. | Flat Washers #10 | 2 |
New Sleeve Guard Parts
114A
127 | ||
126 | ||
|
127
126
Figure 2. New sleeve guard parts.
REF PART # | DESCRIPTION |
114A | P1014Z114A | IDLER ROLLER GUARD V2.03.08 |
SLEEVE GUARD | ||
126 | P1014Z126 | LOCK KNOB |
127 | PW03 | FLAT WASHER #10 |
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL10589 PRINTED IN TAIWAN