Grizzly G1014ZX owner manual

2.Attach the longer upper and lower cross braces to 2 of the stand legs. Bolt together using the 5⁄16''-18 x 1⁄2'' Carriage Bolts, Washers and Hex Nuts provided. Figure 3. Repeat this step for the other 2 legs. Note: Do not tighten any bolts down until the stand is completely assembled.

4.Now attach the other sub-assembly to the ends of the short braces. Tighten down all the stand bolts at this time. Figure 5.

Figure 5.

Figure 3.

3.Bolt the shorter upper and lower braces to one of the 2 stand sub-assemblies. Figure 4.

Figure 4.

G1014Z Combination Sander -9-