Machine Data

GRIZZLY MODEL G1014Z COMBINATION SANDER

Design Type	Floor Model
Overall Dimensions and Specifications:
Base	16 1⁄2" x 15"
Height (Belt arm horizontal)	40"
Height (Belt arm vertical)	56"
Width	20"
Length	22"
Table (Disc)	6" x 11 3⁄4"
Motor Shaft Size	5⁄8"
Weight	120 lbs.
Features:
Sanding Belt	6" x 48"
Sanding Belt Speed	2300 SFPM
Cast Iron Disc	9" Diameter
Cast Iron Disc Speed	3450 RPM
Roller Drive	Ball Bearing
Miter Gauge Groove	3⁄8" x 3⁄4"
Miter Gauge	Die Cast Aluminum / Aluminum Bar
Table Tilt Range	0-45°
Construction:
Base	Cast Iron
Table (Disc)	Cast Iron
Stand	Stamped Steel
Motor:
Horsepower	3⁄4 HP
Phase Type / Voltage	Single Phase / 110V/220V
Amperage	10@110V / 5@120V
Cycle and RPM	60 Hertz / 3450 RPM
Switch	On / Off Toggle
Power Transfer	Belt Drive
Bearings	Sealed, Permanently Lubricated

Specifications, while accurate, are subject to change without notice.

-20-	G1014Z Combination Sander