Panasonic PV-C2063A Auto Operation Functions, Tape Position Display, Press Tape Position

*Important: If a remote control button does not work when pressed, press the COMBO button on the remote and try the button again.

FF

REW

Auto Operation Functions

■Auto Shut Off

No broadcast signal in TV (Only when Weak Signal Display is set to OFF), blank tape is Played for 5 minutes => Power turns off

•This feature is canceled if any button is pressed during above mode.

■Auto Playback

Insert a tape in Power off mode => Power turns on

•Playback begins if tape has no record tab.

■Auto Rewind (except for Recording) Tape reaches its end

=> Rewind => Stop

■ Playback Auto Eject (Repeat Play is “OFF”)

Tape with no record tab reaches its end

Rewind => Stop => Eject

SELECT/SET :CH UP

:CH DOWN

Tape Position Display

To find out present tape position and amount of tape remaining.

Tape position is displayed for VHS-C Cassettes type, tapes under 30 minutes, and some other tapes, but the position is not correct.

Press TAPE POSITION	to detect
1current tape position.

:VOL UP :VOL DOWN

NUMBER

Keys

FF

REW

TAPE

POSITION

SEARCH

DETECT I NG TAPE POS I TI ON

			SLP
		R 120 MIN.
BEG
	I N	END

•“DETECTING TAPE POSITION” is displayed only when a

cassette is first inserted and it takes several seconds for correct tape position to appear.

•The present tape position

indication and amount of tape remaining (according to tape speed) is displayed.

•Tape remaining time display may not be precise.

2	Press TAPE POSITION		(or wait 5
	seconds)	to return to normal screen.

Note

•This function cannot display exact amount of tape remaining for tapes 30 minutes or less, or for tapes over 120 minutes in length.

25