Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some basic DSS or Cable box functions.
The Universal Remote Control Setup
1Find your DSS box or Cable box
Brand Code Number from one of the charts on the next page.
2 | Setup remote. |
|
|
Hold down DSS CABLE | and press | ||
| number keys | to enter code. |
|
•For code 100 or greater, first press 100 key, then the remaining digits. E.g. for 102, press 100, then press 0, and then press 2.
3Confirm code entry.
Press POWER * to turn selected unit ON or OFF.
• See below for controllable functions in each mode.
Notes
•Please repeat the Universal Remote Control Setup after replacing remote control batteries.
•The remote control will not operate all DSS receivers or Cable Boxes made by the manufactures listed. If you get no results, your particular brand cannot be controlled.
Using the Universal Remote Control
Once the remote control has been properly set up, you can select COMBO, DSS or CABLE mode depending on which functions you wish to control. (See below.)
Press COMBO or DSS CABLE | on the remote | ||
control | to select | the desired mode. (See below for |
|
buttons | available | in each mode.) |
|
Set to COMBO:
•All TV and VCR functions.
Set to DSS CABLE:
•Basic VCR functions, e.g. PLAY, REC, etc.
•CABLE/DSS functions, e.g. POWER, ENTER, number keys (except 100 key), CH UP/DOWN.
POWER
COMBO
DSS/ CABLE
NUMBER Keys
ENTER
32
For assistance, please call :