Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.
Index Search
Program End Search
Go directly to the desired recording.
| INDEX SEARCH |
| |
ENTER | INDEX NUMBER :1 | ||
1 US I NG 1 | KEYS |
| |
FORW ARD | SEARCH | :FF | |
REVERSE | SEARCH | :REW | |
NEXT : SEARCH
EX I T: STOP
Press SEARCH* in Playback or Stop mode to display INDEX SEARCH screen,
and then | press |
NUMBER Keys | to |
select the recording number.
•To calculate number, see below.
Locates end point of recording for continuity. |
|
| ||
Press SEARCH | twice in Playback | |||
or Stop mode to display |
|
| ||
1PROGRAM END SEARCH screen |
| |||
. |
|
|
|
|
2 | PROGRAM | END SEARCH | Press FF | to |
|
| start search. |
| |
|
|
|
| |
SEARCH START | :FF |
|
| |
EX IT: SEARCH |
|
|
| |
Example of | Program End Search |
| operation. | |
Press FF | or REW |
to start search.
Fig.1 | PLAYBACK DIRECTION |
|
| |||||||
| ||||||||||
|
| Program 1 |
|
| INDEX |
| Program 2 or BLANK | |||
2 | INDEX SEARCH |
|
Play begins at search end. To search forward or
Press SEARCH button | End Point |
| FF |
FORW ARD SEARCH | :FF |
REVERSE SEARCH | :REW |
back 1 index,
press FF or REW
while screen left in displayed (10 sec.).
Fig.2
Program 1 | BLANK | INDEX | Program 2 |
Press SEARCH button
FF
Fig.3 IfsearchexceedsafewsecondsinBLANKarea.
BLANK
End Point
■To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
| Press SEARCH button |
Program 1 | BLANK |
| FF |
End Point
INDEX | Program 2 |
|
|
1 | 2 | 3 | 4 |
| 5 | 6 | 7 |
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
| 1 |
| 2 |
| 3 | 4 | 5 |
| 6 | 7 | |
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: |
| indicates start points of each recording. |
|
| |||||||
|
|
| |||||||||
|
|
| |||||||||
Upon locating end point...
The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops.
Press SEARCH button
Notes
•Make each entry within 10 seconds, or the Index Search mode will be canceled.
•If Index Search is started very close to an index mark, that index mark may not be counted in the search.
Notes
•If Program End Search is started very close to an index mark, that mark may be skipped over.
•To cancel, press PLAY or STOP.
24
For assistance, please call :