5 Set beginning hour | – TIMER PROGRAMMING – | ||||
Use [K / L] until the desired hour | CH DATE | BEGIN END | |||
appears. | - - | ||||
- - | |||||
(Example: “ 7, PM” for 7:30PM) | - - | ||||
- - | |||||
| B 61 | 7/04 MON | 7:12PM | ||
Then press [B]. | - - | ||||
- - | |||||
| - - | ||||
|
| ||||
6 Set beginning minute | – TIMER PROGRAMMING – | ||||
Use [K / L] until the desired | CH DATE | BEGIN END | |||
- - | |||||
minute appears. | |||||
- - | |||||
| - - | ||||
(Example: “30” for 7:30PM) | B 61 | 7/04 MON | 7:30PM | ||
- - | |||||
Then press [B]. | - - | ||||
- - | |||||
- - | |||||
|
| ||||
7 Set end hour | – TIMER PROGRAMMING – | ||||
Use [K / L] until the desired hour | CH DATE | BEGIN END | |||
- - | |||||
appears. | |||||
- - | |||||
| - - | ||||
(Example: “8, PM” for 8:50PM) | B 61 | 7/04 MON | 7:30PM 8:30PM- - | ||
- - | |||||
| - - | ||||
Then press [B]. | - - | ||||
- - | |||||
|
| ||||
8 Set end minute | – TIMER PROGRAMMING – | ||||
Use [K / L] until the desired | CH | DATE | BEGIN END | ||
minute appears. | - - | ||||
- - | |||||
| - - | ||||
(Example: “50” for 8:50PM) | B 61 | 7/04 MON 7:30PM | 8:50PM- - | ||
- - | |||||
Then press [B]. | - - | ||||
- - | |||||
| - - | ||||
9Set the tape speed
– TIMER PROGRAMMING –
Use [K / L] until the desired tape | CH DATE | BEGIN END | ||
| ||||
speed appears. (Example: “SP”) | - - | |||
- - | ||||
| - - | |||
| B 61 | 7/04 MON 7:30PM 8:50PMSP | ||
| - - | |||
| - - | |||
| - - | |||
| - - | |||
10Finish setting the program
Press [ENTER] or [RETURN] to complete setting.
•To set another program, repeat steps 2 to 10.
•Press [SETUP] to exit the menu.
11Set the timer
Press [POWER] to set automatic timer recording. The recording indicator lights up.
•You must turn off the unit to activate automatic timer recording.
If power is not turned off and you continue watch- ing TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time.
•If the
NOTES:
•The display will not be turned on automatically at the time the programmed recording begins. To watch the currently recorded TV program or to play a DVD disc, press [POWER] and [SELECT] to choose the TV/VCR mode or the DVD mode.
•If the tape runs out before the end time, the unit will switch to the stop mode immediately and the tape will be ejected.
TIMER PROGRAM EXTENSION
To shift the time schedule of an automatic timer recording.
1)Press [POWER]. 2)Repeat step 1 on page 31.
3)Press [RECORD] and select the desired program using [K / L].
4)Press [RECORD] again.
Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press [PAUSE F] on the remote control. The recording time returns to the original time.
NOTE:
•When you shift forward the time schedule during recording, the recording speed will automatically be set to the SLP mode.
5)Press [ENTER] or [RETURN] to exit the setting menu. Then press [SETUP] to return to original mode.
TO CORRECT A PROGRAM
•While setting a program; press [s] to go back one step and enter the correct numbers using [K / L].
•After setting a program; 1)Press [POWER].
2)Repeat steps 1 to 2 on page 31.
3)Press [B] (or press [s] to go back one step) until the part you want to correct begins flashing, then make the changes using [K / L].
4)Press [POWER] to set automatic timer recording.
TO CANCEL AN AUTOMATIC TIMER RECORDING
1)Press [POWER].
2)If recording is in progress, press [C / A STOP/EJECT] on the unit.
3)Repeat steps 1 to 2 on page 31 and select a pro- gram you want to cancel.
4)Press [C.RESET].
5)Press [SETUP] to return to TV mode.
- 32 - | EN |