B DISPLAY SETTING
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 43.
3 Using [K / L] select the below items then
C AUDIO SETTING
Choose the appropriate Audio settings for your equip- ment as it only affects during the playback of DVD discs.
press [ENTER].
TV MODE: QUICK
You can change certain aspects of the DVD display screens and
Follow steps 1 to 2 in the “CUSTOM MENU” section on page 43.
3Using [K / L] select the below items then press [ENTER].
¡4:3 LETTER BOX (default): |
|
|
|
|
|
|
| SETUP |
|
|
| ||
To show black bars on top |
| DISPLAY |
| |||
|
|
|
|
|
| |
|
|
|
| 4:3 LETTER BOX | ||
and bottom of the screen. |
|
| TV MODE |
| ||
|
| STILL MODE |
| AUTO |
¡4:3 PAN & SCAN: To show a full height picture with both sides trimmed.
STILL MODE:
This function allows you to adjust picture resolution and quality in the still mode.
¡AUTO (default):
DRC
(Dynamic Range Control):
¡To compress the range of soft to loud sound.
¡The default setting is “ON”.
DOWN SAMPLING:
¡ON : Output in 48 kHz. (default)
¡OFF : Output the original sound.
SETUP | AUDIO |
|
|
|
|
|
| DRC |
| ON |
|
| DOWN SAMPLING | ON |
| |
| DOLBY DIGITAL | BITSTREAM |
| |
|
|
|
|
|
|
|
|
|
|
| SETUP | AUDIO |
|
|
|
|
|
|
|
| DRC |
| ON |
|
| DOWN SAMPLING | ON |
| |
| DOLBY DIGITAL | BITSTREAM |
| |
|
|
|
|
|
|
|
|
|
|
SETUP DISPLAY
Automatically select the best
resolution setting (FRAME or FIELD) based on the data characteristics of the pic-
tures.
¡FIELD: Select “FIELD” when the pictures are still unstable even if “AUTO” is selected.
FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.
¡FRAME: Select “FRAME” to display relatively motionless pictures in higher resolution. FRAME improves the picture quality, although it may unstabilize the pictures due to simultaneous output of two field data.
4Press [SETUP] to exit the menu.
When playing disc with copyright Protection
¡If you select “OFF”, copyright protection will be activated and sound will be down sampled at 48kHz.
DOLBY DIGITAL: | QUICK |
|
|
|
|
|
| |
|
| SETUP | AUDIO |
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
| DRC | ON |
| ||
Set to “BITSTREAM” when | ||||||||
| DOWN SAMPLING | ON |
| |||||
the unit is connected to a |
| DOLBY DIGITAL | BITSTREAM |
| ||||
|
|
|
|
| ||||
|
|
|
|
|
Dolby Digital Decoder.
¡BITSTREAM: Output a Dolby Digital signal (default)
¡PCM: Convert the Dolby Digital to PCM (2 channel stereo)
4Press [SETUP] to exit the menu.
QUICK MENU
¡You can select the “TV MODE” or “DOLBY DIGITAL” from the QUICK menu quickly. To access the QUICK menu, select “QUICK” instead of “CUSTOM” at step 1 on page 43.
LANGUAGE SETTING FOR THE ON-SCREEN MENUS
¡You can access the TV/VCR SETUP menu by pressing [SETUP] from the DVD mode. Refer to “MENU LANGUAGE” on page 21 to change the language for the
- 44 - | EN |